The selection method of the crimping wheel of the inverted wire drawing machine When the inverted wire drawing machine is in normal operation, the wire can be well wound on the large plate, mainly rel
The appearance design of the wire and cable drawing machine combines the design concept of the car, making it beautiful in appearance and smooth in lines, which looks very unique. Its internal structu
The output of the wire and cable drawing machine is very stable, and the frequency is relatively low, the torque is large, its performance is high, it can be controlled according to the vector, and th
According to the actual situation of the copper wire drawing machine, re-match the die of the wire drawing machine: adjust according to the drawing principle, so that the speed of the annealing wheel
Solution to the operation problem of copper wire drawing machine Due to the uninterrupted production of the copper wire drawing machine device, the wire brushing speed is gradually and annealed. When
What are the drawing lubrication methods of stainless steel wire drawing machine? 1. The single die groove of the stainless steel wire drawing machine is distributed and lubricated Mainly used for non
1. The wire and cable wire drawing machine, aluminum and copper wire drawing machine and other wire drawing machine equipment are respectively composed of winding head, wire arrangement, wire arrangem
1. Before operating the wire drawing machine, the operator should carefully read the drawings and related technical data, and understand and master them. During processing, it is necessary to correctl
First of all, it is necessary to provide a good working environment for the inverted wire drawing machine. Do a good job of cleaning, so that the gear pump in the wire drawing machine can be kept in a
1. The material rack and the material trough should be installed straight, and should be aligned with the guide cylinder, and the center of the straight cylinder and the undercut hole should be aligne
Before production, it is necessary to do a full self-inspection on the copper rod to be produced, find out the quality defects of the copper rod in time, and find corresponding countermeasures in time
1. The sizing area of the wire drawing die will become larger due to normal wear during uninterrupted production. 2. Due to the quality problems of various rods. During the production process, the rod
LanguageLanguage