1. Before operating the wire drawing machine, the operator should carefully read the drawings and related technical data, and understand and master them. During processing, it is necessary to correctly select and confirm the drawing direction, drawing surface, etc., and operate in accordance with the requirements of the rules. The appearance of the workpiece must also be maintained to prevent it from being scratched and to avoid deterioration.
2. The products processed by the wire drawing machine should be handled with care, and should be maintained so as not to damage the products. The outside and surrounding of the equipment should be clean, tidy and sanitary; the air supply pipes, fittings and belts should be inspected to see if they are good to the touch and if they need adjustment; the air filter should be drained of water, and the bearing housing should be smoothed out.
3. In addition to daily maintenance, check whether the tension of the wire drawing machine conveyor belt and abrasive belt is appropriate and whether it needs to be adjusted; whether the wire drawing machine is running correctly and safely to ensure that the wire drawing machine is always in good working condition.
4. After use, the power must be turned off and the equipment and surrounding areas must be cleaned. Regularly clean the equipment thoroughly, add lubricating oil and simply seal it up. It is forbidden to directly contact the wire drawing machine with water or other corrosive items to avoid unnecessary damage.
5. In order to keep it in good working condition, regularly clean the water tank of the wire drawing machine and add lubricating oil to the lubricating parts. If any noise, vibration or other abnormal phenomenon is found in the work, stop the machine immediately for inspection, and if necessary, notify the professional maintenance personnel for inspection and maintenance or notify the wire drawing machine manufacturer to send personnel for maintenance.
www.chinawiredrawingmachine.com
