1. The wire and cable wire drawing machine, aluminum and copper wire drawing machine and other wire drawing machine equipment are respectively composed of winding head, wire arrangement, wire arrangement and off-line device, drum changer, oil mist lubrication device, pneumatic device, spray device, machine head Composition of the braking device. The connecting part of the main shaft and the machine head adopts conical surface meshing and positioning to maintain the rotation accuracy of the main shaft.
2. The structure of the machine head is centrifugal block type, which consists of the main body of the machine head, the block-up, the block-up key, the pressure spring, the front cover of the machine head and the rear part of the machine head. The material of the entire head is made of aluminum alloy and stainless steel. The manufacturer of the wire drawing machine pointed out that when the head rotates at a high speed, under the action of centrifugal force, the expansion block will support the reel, and the fibers are wound on the surface of the reel. When the head of the winding machine stops rotating, the centrifugal force disappears, and the rising block falls freely to unload the drum.
3. The movement of the helical line arrangement shaft of the wire drawing machine is divided into rotary motion and reciprocating motion: the rotary motion is realized by the arrangement motor through the synchronous belt drive, and the reciprocating motion is driven by the servo motor through the synchronous belt. The stroke of the reciprocating movement is between 50 and 200mm, and the stroke of the reciprocating movement can be adjusted by changing the position of the two limit sensors. The principle of rotation of wire and cable wire drawing machines, aluminum and copper wire drawing machines and other wire drawing machines is similar.
4. The function of the traverse device of the wire drawing machine is to move the traverse to the nose at the beginning of the winding, and secondly, to increase the thickness of the filter cake with the extension of time during the winding process. Gradually move the flexing device to the right to keep the distance between the flexing cable and the surface layer of the pie cake constant to ensure the same tension between the inner and outer layers of the pie cake.
5. The drum changing device of the wire drawing machine is jointly driven by the drum changing motor and the cylinder, so that the rotation is located in the proper winding and stretching position. The motor drives the turret rotor through the reduction gear and chain until the detection sensor detects the stop; then the turret positioning cylinder plays the role of rotating the turret rotor at the designated position and firmly fixing the stopper to ensure the normal operation of the wire drawing operation.
www.chinawiredrawingmachine.com
