What are the drawing lubrication methods of stainless steel wire drawing machine?
1. The single die groove of the stainless steel wire drawing machine is distributed and lubricated
Mainly used for non-slip accumulating multi-die wire drawing machines, it has no restrictions on the form of lubricant. Cooling is achieved by circulating water in the die cavity. Since the cavity is open, the lubricant is directly visible for easy adjustment. But dirty equipment and venues.
2. Immersion lubrication of stainless steel wire drawing machine
The special groove of the wire drawing machine is filled with lubricant, and the drum, wire segment and die are all immersed in the lubricant. The structure is simple and can ensure the continuous lubrication and cooling of the wire drawing machine. The disadvantage is that the precipitation during drawing may generate chips, which continue to be transported to the drum and the die, the life of the die and the drum will be affected, and the quality of the wire surface will also be affected. The lubricating tucks need to have cooling devices to prevent the lubricating fluid from getting too hot.
3. Circulating lubrication system of stainless steel wire drawing machine
The lubricating fluid on the wire drawing machine must ensure that it has a fixed composition and suitable temperature. It can be used on a single machine, or multiple wire drawing machines can be used at the same time. Its advantage is that the metal chips in the lubricating fluid can be fully precipitated and cleaned regularly to ensure the cleanliness of the lubricating fluid. Its disadvantage is that it needs to analyze the lubricating fluid from time to time and replenish the lubricant in time.
www.chinawiredrawingmachine.com
