lubrication system of the inverted wire drawing machine

The lubrication system of the inverted wire drawing machine has the following characteristics:

Precise lubrication method

The inverted wire drawing machine adopts a targeted lubrication method. Since the wire drawing process is mainly concentrated in the die area, its lubrication system can accurately deliver lubricant to the contact point between the die and the wire. For example, through specially designed lubrication channels and nozzles, the lubricant can be evenly distributed on the surface of the inner hole of the die in the form of mist or drops, ensuring that the wire can be fully lubricated when passing through the die. This precise lubrication not only reduces the waste of lubricant, but also effectively reduces the friction between the wire and the die, improving the quality and efficiency of wire drawing.

Synergy with the wire drawing process

The lubrication system is closely coordinated with the wire drawing process. When the wire drawing machine is started, the lubrication system will start synchronously and automatically adjust the lubricant supply according to factors such as the wire drawing speed and the material of the wire. When the wire drawing speed is fast, the lubricant supply is appropriately increased to meet the lubrication needs during high-speed wire drawing; when the wire drawing speed is slow or softer materials are drawn, the supply is reduced accordingly. For example, when drawing copper wire and the wire drawing speed is high, the lubrication system can provide enough lubricant in time to prevent friction overheating from affecting the wire quality and mold life.

Preventing lubricant contamination

The lubrication system of the inverted wire drawing machine focuses on preventing lubricants from contaminating the wire and the working environment. On the one hand, during the delivery and application of the lubricant, reasonable sealing and protective devices are used to prevent the lubricant from splashing onto the non-drawing area of the wire, ensuring the cleanliness of the wire surface. On the other hand, the system is equipped with a recovery device to recycle excess lubricant to prevent it from leaking onto the ground or other equipment, which not only reduces the loss of lubricant, but also keeps the working environment clean.

Flexibility to adapt to different working conditions

The lubrication system can adapt to a variety of different working conditions. For different wire drawing materials, such as metal alloys, composite materials, etc., and different wire drawing die materials, the lubrication system can use different types of lubricants. For example, when drawing alloy steel with higher hardness, lubricants containing extreme pressure additives can be used to enhance the lubrication effect; when drawing soft materials, ordinary oil-based lubricants can be selected. At the same time, the parameters of the lubrication system (such as the flow rate and pressure of the lubricant, etc.) can be flexibly adjusted according to the actual wire drawing requirements to meet diverse production needs.