When operating the inverted wire drawing machine, the operator must abide by the relevant guidelines. Only this ability can ensure that our production work can be completed smoothly. First of all, the operator of the inverted wire drawing machine should be clearly designated, and the operator who is not the post should not operate the machine without consent.
In addition, no one is allowed to dismantle the safety protection equipment at will, nor to replace the parts without permission. Secondly, it should be ensured that the jog switch of the equipment is kept active, and it should be placed in a hidden place when not in use to prevent misoperation.
When operating the die-piercing machine, operators should pay special attention to protect their own personal safety. Never put their hands on the tumbling part of the die-piercing machine, nor on the drum of the die-piercing machine, and use the die-piercing machine. Turn off the power supply in time after completion. Wear protective glasses when connecting to prevent sparks from flying out and hurting people.
When the inverted wire drawing machine is in operation, it is not allowed to perform maintenance or cleaning operations on the equipment to prevent accidents. Before opening the inverted wire drawing machine, all debris on the equipment should be cleaned up to prevent them from being involved in the equipment and causing an accident. Do not use disks with loose or damaged cores. In addition, care should be taken that no personnel other than operators are present around the equipment.
When operating the inverted wire drawing machine, if an open flame is found, it must be extinguished in time. If the technology cannot be extinguished, the power supply should be cut off, and then the fire extinguisher should be aimed at the root of the flame to extinguish. Fire extinguishers after use should be stored in designated places.
www.chinawiredrawingmachine.com
