Operators should pay special attention to protect their personal safety when operating the piercing machine. Never put their hands on the rolling part of the piercing machine or put their hands on the roller of the piercing machine and use the piercing machine. The power supply should be turned off in time after completion. Wear protective glasses when connecting to prevent sparks from flying out and hurting people. When the inverted wire drawing machine is working, it is not allowed to perform maintenance or cleaning operations on the equipment to prevent accidents. Before opening the inverted vertical wire drawing machine, all the sundries on the equipment should be cleaned up to prevent it from getting caught in the equipment and causing trouble. Do not use the core to loosen the disk, which may have been damaged. In addition, you should also be careful not to have personnel other than operators present around the equipment.
When operating the inverted wire drawing machine, if an open flame is found, it must be extinguished in time. If the technique cannot be extinguished, the power should be cut off, and then the fire extinguisher should be aimed at the root of the flame to extinguish. Fire extinguishers after use should be stored in designated places.
https://www.chinawiredrawingmachine.com/
