High Speed Drawing Machine For Copper Wire

High Speed Drawing Machine for Copper Wire introduction Annealing mode DC-annealing, annealing the use of advanced low-voltage power supply high current power supply, the control system adopts microcomputer intelligent control, equipment operation more stable, the maximum speed of 8 m / sec....

Description

High Speed Drawing Machine for Copper Wire introduction

Annealing mode DC-annealing, annealing the use of advanced low-voltage power supply high current power supply, the control system adopts microcomputer intelligent control, equipment operation more stable, the maximum speed of 8 m / sec.

Pulley OTO TypeDry Wire Drawing Machine.jpg


copper rod breakdown  wire drawing machine (450/LT9) 

number of dies:9

installed capacity:125KVA (Main motor:AC.110KW,spooler motor:15KW)

drive: frequency inverters

Dimension length 3000 * 1800mm Weight 6.5T width  

 This company produces LT9-450 continuous annealing line used with pull-plus double-disc received Continuous Annealing Line (or, as the nose unloading line) production model, the formation of the entire production line continuous operation, drawing machine from a copper rod into the line of direct pull 8.00mm Model copper wire.


Specifications

LT9-450Copper Large Pull with continuous annealing production line

copper rod breakdown machine;rod breakdown machine;8mm copper rod dawing machine

From 8mm to 1.78mm—3.30mm

copper rod input diameter:8mm,

output diameter: 1.78mm—3.30mm

production speed:480meters/s 

production capacity: 1200KG/hour


LT-15DieHigh-speed copper drawing machine Main technical parameters

Inlet wire diameter

3.00mm

Outlet diameter

0.5mm—2.90mm

Drawing number

15

Power

30KW

Maximum speed

600m/min

Fixed speed wheel diameter

350 mm

Hourly output

1000kg/h


LT-1200 large Pull continuous annealing line supporting equipment as follows

Actinomyces gantry frame wear die rolling machine 110KW motor control cabinet tip LT-9 mold copper big pull 

LT-1200 annealing machine LT-1200 cabinet annealing operation of the main electrical cabinet automatic double-disc MD-up Machine XB-600 like the nose and unloading-ray machine (also purchased) can store 1 tonne of copper wire used in the production line when a large single-core BV capacity pay-off.


Experience and markets

Our factory has more than 20years working experiences on researching and selling. Products are well sailed all over the world, got many compliments from customers.


Our Advantages

a. Extensive production experience: we are specialized in all kinds of wire drawing machine with an experience of 10 years.

b. Complete production facilities: owning precision centerless grinding machine, straightening machine, fine polishing machine, precision lathe, milling and drilling machine, roller press and other advanced equipments. Our technicians will do regular scheduled maintenance on these machines to guarantee them work well.

c. High quality raw material: we mainly choose good supplier from big company, such as ABB , Siemens 

d. Strict Physical/Chemical testing procedures: meeting the requirements of the product design and process, providing reliable testing data.

e. Short Delivery time: If one container 15-20 days. 

g. Best after-sale service: Over 60% products are sold to the Southeast Asia, Middle East and Europe, and all products are trusted by domestic and foreign customers.

High speed pulley wire drawing machine packing and shipment-1.jpg


FAQ

1. Q:About the after-sale service, how can you solve the problems occurred of your overseas customer in time?

A:The warranty of our machine is normally 12 months, during this period, we will arrange the international express immediately, to make sure the replace parts to be delivered as soon as possible.

2. Q:After we placing an order, will you arrange the installation of the machine at present?

A:All the machines will be tested well before delivered, so almost of them can be used directly, also our machine are easy to be installed, if you customer needs our assistance, we will be pleased to arrange the installation, but all the cost will be be charged by you.

3. Q:How can i get the after-service?

A:We will send you the spare parts by free if the problems caused by us.If it is the men-made problems,we also send the spare parts,however it is charged. Any problem, you can call us directly.

4. Q:How can i trust your company?

A:With 10-years-professional design, we can provide you suitable suggestion and lowest price

Assessed by third party, national patents and CE, ISO for all equipment,  .

5. Q:Is your price competitive?

A:Only good quality machine we supply. Surely we will give you best factory price based on

superior product and service.

6. Q:why choose us?

A:We are one of High-tech Enterprises, AAA Contract and Trustworthy Enterprises, AAA Technology Consulting Firm. We are the manufacturer of general ceramics USA FDA authorized, and obtained the certificate of ISO9001.

Customers visit.png


Please feel free to send us your detailed requirements, you would be satisfied with our service.

Contact Below:

Wuxi Wandeshun Machine Co., Ltd

Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China

Tel:86-510-85260990

Mobile:86-13921534531

       86-13806184032

       86-13915322227

Fax:86-510-85261990

Email:sales01@wxwds.com


Should you're in need of quality and stable high speed drawing machine for copper wire made in China, welcome to buy the machine from our factory. We are one of the leading such manufacturers and suppliers in China, equipped with advanced equipment and technology. Welcome to contact us.

Related Products

Feedback

Products List