(1) The lubrication of the gearbox should be kept well, and the lubricating oil should be replaced every six months or so. In addition, the bearings, transmission chains, sprockets, etc. should also be lubricated accordingly. (2) After the wire drawing machine runs for three months, the lubricating oil should be replaced, and the equipment should be inspected comprehensively. If the screws are loose, they should be tightened in time.
(3) Machines and equipment should be cleaned up every six months or so, especially in some gaps. After a full year of operation, a comprehensive inspection should be carried out, including electrical components, etc., if worn, they should be replaced in time.
https://www.chinawiredrawingmachine.com/
