What are the daily maintenance and care methods for polishing steel brush machines?
cleaning job
After each use, promptly clean the machine surface, brush head and surrounding areas of metal debris, dust and debris.
Pay special attention to cleaning the residual materials in the gaps of the brush head to prevent blockage and affect the working effect.
Check the brush head
Check the wear of the brush head regularly. If there is severe wear, bristle shedding or deformation, replace it in time.
Make sure the brush head is firmly installed and not loose.
Lubrication maintenance
According to equipment requirements, regularly add appropriate amount of lubricating oil to transmission parts, bearings and other parts to reduce friction and wear.
Motor maintenance
Check the operating conditions of the motor, including sound, temperature, vibration, etc.
Clean the dust on the motor casing to maintain good heat dissipation.
Belts and chains
Check the belt for tightness and adjust or replace if necessary.
For the chain, clean it regularly and add an appropriate amount of grease.
Electrical System
Check for damaged wires and loose plugs.
Clean the dust inside the control box to prevent electrical malfunctions.
Regular calibration
Regularly calibrate the equipment's working parameters, such as speed, pressure, etc., to ensure the stability of the polishing effect.
Storage environment
When the machine is not in use, it should be stored in a dry, well-ventilated place to avoid moisture and rust.
In short, regular inspection and maintenance can effectively extend the service life of the motor and reduce the probability of failure. Wandeshun Machine uses high-quality polishing steel brush machines to ensure the durability and reliability of the product, and accompany you for a long time.
https://www.chinawiredrawingmachine.com/
