Application of nail cutters and nail molds for nail making machine 1: Raw materials, but disc elements are also divided into many specifications and models. People generally use Q195, Q215 or Q235. Their strength is gradually improved. Use Q235 cable to make nails. The wear of the nail cutter and nail mold is undoubtedly greater than that of the Q195. If a harder cable is selected, the service life of the nail cutter and nail mold will continue to be further reduced. The second is metal wire drawing: the whole process of metal wire drawing will reduce the service life of the wire drawing die. If it drops to a certain level, there will be burrs on the drawn wire drawing die, which will further increase the wear of the nail knife. The drawing die must be replaced at this moment. The third is that the adjustment of the nail knives of the nail making machine also has a certain technological content. It is stipulated that the two nail knives cannot be excessively inseparable with each other, nor can they be excessively spacious. Excessive spacious will cause the nail tip cut off, however, inextricably linked to excessive consumption will increase the nail knife. Both the nail knife cut out for pitch nail tip top edge contains boats, but the force will be able to wave off the moment after polishing will be able to throw a nice sharp nails, loss of nails knife will greatly reduce. Nail nail machine parts have knives and nails die, in the application of nail knife and drawing dies, the effect from what can make full use of the nail and nail cutter mold applications more long-term, a good number to pay attention to the following standards.
https://www.chinawiredrawingmachine.com/
