The working principle of the straightening machine: the motor drives the belt drive, and can make the straightening drum rotate at a high speed, so that the steel bar passing through the straightening drum is straightened, and the rust on the surface of the steel bar is removed; then the motor is driven by another pair of reduction belts and gears. The reduction box can drive two conveying rollers, which can pull the steel bar to move forward. On the other hand, it drives the crank wheel to drive the hammer head to move up and down. When the steel bar is adjusted to the predetermined length, the hammer will hit the upper tool holder to cut the steel bar. When the cut steel bar falls into the receiving rack, it will be subjected to the elastic force of the spring, and the tool table will return to its original position. Completed a work cycle. The working characteristics of the straightening machine mainly include the neat cut and small error, and the straightening effect is good.
https://www.chinawiredrawingmachine.com/
