Wire straightening and cutting machine— consisting of straightening roller, straightening press block, and bearing seats at both ends, complete the straightening of the wire. Its power is a motor installed in the lower part of the frame, which drives the straightening shaft to rotate at a high speed through a V-belt. Feeding mechanism -the pressure roller part is coosed of two synchronously operating pressure rollers, which are driven by a V-belt chain to drive a pair of gear pairs, and the coaxial pair of pressure rollers operate synchronously. When working, the metal wire runs forward under the action of friction through the wire groove on the outer circle of the pressure wheel, and the wire feed speed can be changed by adjusting the pressure wheel spring. The maximum value is equal to the linear velocity of the outer circle of the pressure roller. During work, the pressure should be adjusted appropriately according to the diameter and rigidity of the processed wire to obtain the best straightening effect and production efficiency. Cutting mechanism -The cutting mechanism is composed of an eccentric mechanism and the knife holder at one end of the straight wire path to complete the cutting action.
https://www.chinawiredrawingmachine.com/
