Security
Wear appropriate protective equipment, such as goggles, masks, earplugs and gloves, to prevent eye damage from flying debris, inhalation of dust, hearing damage from noise, and hand injuries.
Check the belt
Before installing the abrasive belt, check it for damage, cracks or loose joints.
Make sure the specifications and grit of the abrasive belt meet your processing requirements.
Installation and commissioning
Install the abrasive belt correctly so that it is properly tensioned on the axle and avoid being too loose or too tight.
Debug the machine to ensure that the sanding belt runs smoothly without deviation.
Workpiece Fixing
Fix the workpiece to be processed firmly on the workbench to prevent it from moving during the grinding process and causing accidents.
Operation Specifications
Follow the equipment's operating manual to follow the correct starting and stopping procedures.
Keep your hands away from the running part of the sanding belt and do not touch it when it is running.
Controlling stress
Apply even and moderate pressure when grinding to avoid excessive pressure that may cause the sanding belt to break or damage the workpiece.
Heat dissipation and cooling
When used continuously for a long time, pay attention to the heat dissipation of the machine to prevent overheating and damage to the motor.
Cleaning and maintenance
After work, clean up the debris and dust on the machine in time to keep the equipment clean.
Regularly perform maintenance on the belt sander, check the wear of components, and replace severely worn components in time.
If you also want to know the precautions for using the belt sander , please contact Wandeshun Machine for consultation.
https://www.chinawiredrawingmachine.com/
