The nail making machine is based on the perspective of energy-saving and efficient waste utilization, turning waste into treasure, and the perspective of users being able to get rich quickly. It is mainly based on economic practicality, and has achieved high technical content and easy operation. It has low power, saves energy, and has stable and reliable performance. The quality meets the standards. The equipment has the characteristics of small size, flexible and convenient movement, low noise, low power consumption, and easy installation. Therefore, this project has become an ideal investment project for enterprises, individuals, families, laid-off workers, and farmers to get rich quickly. Process flow: scrap steel bars-----A+B type wire drawing machine-----nail making machine (choose one)-----polishing machine-----packaging and shipment
The nail making machine is mainly divided into four parts, the most important of which is wire drawing. Wire drawing - when making nails after purchase, you need to determine what kind of steel bars will be used for nailing in the future, such as new steel bars, scrap steel bars, etc. It is more troublesome to draw wires from scrap steel bars, and it is not as fast as new steel bars, but the cost and profit of scrap steel bars are very objective. The finished wire drawing is faster, saving some manpower. The speed of nailing is also very fast. Making - after the wire is drawn, it is fed into the fully automatic wire feeding head, and then the drawn wire is fed into the wire feeding head to produce the adjusted semi-finished nails. Polishing - put the semi-finished nails into the polishing machine for polishing, put sawdust, paraffin, gasoline and other chemical raw materials into the polishing machine, and throw out the shiny nails after friction and collision. Packaging - the above three parts are all important, and the packaging can be customized according to the needs of the user. 1. Feeding: Use the waste heads left in the prefabrication yard with a diameter of less than 8mm and a length of more than 10cm and the waste steel bars, cold-drawn wires, waste welding rods, round heads, etc. removed from old houses as raw materials. 2. Principle: 1. First, the raw materials are drawn and rusted by the wire drawing machine, and then drawn into the diameter of the nails you need; 2. Then enter the nail making machine to make round nails; 3. Load into the polishing machine (add raw materials) and polish to the brightness you need before pouring out; 4. Measure and pack for shipment. (It can also be drawn into grid mesh, chicken cages, greenhouses, hangers, car baskets, etc.) 3. Parameters: The machine can produce nails with a length of 50~180 mm (2 inches, 2.5 inches, 3 inches, 4 inches, 5 inches, 6 inches, etc.) by replacing the module to produce round nails of different specifications, the working voltage is 380 volts, 3 people operate, occupying an area of more than 20 square meters, and it can be learned in 1-2 days with primary school education, and it can be put into production after connecting the power supply.
https://www.chinawiredrawingmachine.com/
