The metal wire drawing machine is an important equipment for the production of metal wire rods. It belongs to the pre-processing equipment for the production of metal products such as standard parts. It is mainly used in machinery manufacturing, metal processing, petrochemical industries and other industries. The purpose of using a metal wire drawing machine is to better process the wire or bar through the drawing process of the wire drawing machine, so that the diameter, roundness, internal metallographic structure, surface finish and straightness of the wire or bar can reach the standard Raw material processing requirements for the production of metal products such as parts. Therefore, the quality of the wire or bar pretreatment of the wire drawing machine is directly related to the product quality of standard parts and other metal product manufacturers; the wire drawing machine belongs to the metal wire drawing machine of the metal product equipment industry. The wire drawing machine is widely used in steel wire, rope, wire, etc. Production and pre-processing of metal products such as prestressed steel wires and standard parts. In the metallurgical industry, the wire drawing machine is an important equipment for the production of metal wires. Its main function is to draw various wires into fine wires of various specifications. From the working form and mechanical structure, it can be divided into straight type, looper type, water tank type (etc. For products with different precision and different specifications, different metal types, different specifications of wire drawing machinery can be selected.
For wire and cable manufacturers with copper and aluminum substrates, dual-frequency-controlled fine drawing machines are widely used, while for most steel wire manufacturers, direct wire drawing machines are used more for the characteristics of steel. Among them, the double frequency conversion wire drawing machine is widely used and representative. In the wire drawing process of the wire drawing machine, before the bus bar of each link is put into production, it is hoped to wrap it with rust-proof paper, or even ordinary paper can be recycled; in the production process, the spraying amount of wire drawing oil is insufficient, especially many companies have not done so. The pipeline water pump is regularly managed, which is prone to blockage; the drawing die is not regularly managed, and the copper powder at the entrance of the drawing die is heavily accumulated, which causes the drawing oil to not play a cooling and lubricating effect; the pH value of the drawing oil fluctuates, it is recommended to control around 9; ask employees Do not touch the copper wire with bare hands; must it be produced at the specified speed? The drawing machine is strictly prohibited from over-speed production.
https://www.chinawiredrawingmachine.com/
