1. Cut-off part : This part of the main motor drives the hydraulic pump station through electromagnetic reversing and overflow valve control. The reciprocating stroke of the movable upper knife assembled on the cylinder piston rod of the parallel track movable trolley and the fixed round-bottomed knife assembled on the cylinder seat are frustrated, thereby cutting the wire passing through the round-bottomed knife. As the wire is cut during operation, the momentary resistance during cutting pushes the movable trolley forward to form a knife movement. When the piston rod drives the upper knife back to the position, the supply wire eliminates the resistance. At this time, the movable trolley is pulled back by the wire rope under the action of the heavy mound to return to the position, and the main gear pump, electromagnetic reversing valve, overflow valve, and product It is composed of blocks, movable trolleys, balance rails, high-pressure oil pipes, and oil sump. 2 . Straightening host part : uses multiple cycles of feeding straight, compact structure, better overall performance, high manufacturing precision. The transmission part adopts closed oil bath lubrication, which can greatly reduce the wear of the mechanical parts and improve work efficiency; multiple sets of straightening wheels act on different points of the wire to have a good straightening effect; the movement direction of the wire is completely the same as that of the straightening wheel. Consistent, there is no relative friction, avoiding rib damage; using frequency conversion speed regulation device, wide speed regulation range, effectively saving power and energy, and convenient operation.
https://www.chinawiredrawingmachine.com/
