What factors will affect the rust removal effect of the non-acid cleaning rust removal machine?
Rust removal method
Different physical rust removal methods, such as sandblasting, shot blasting, friction, etc., have different rust removal capabilities and effects. Sandblasting has a greater impact force and is suitable for removing stubborn rust; shot blasting is more suitable for large-area surface treatment.
Abrasive selection
The type of abrasive (such as steel sand, quartz sand, etc.), particle size and shape will affect the rust removal effect. Coarser abrasives are more efficient in rust removal, but may damage the metal surface; fine abrasives are more suitable for fine rust removal.
Stirring method:
The stirring method is one of the key factors affecting the rust removal effect. Different agitation methods, such as spraying, ultrasonic cleaning, etc., have a significant impact on the rust removal effect. Spray and ultrasonic cleaning are generally faster than pure immersion cleaning because they can more effectively transfer cleaning agents to areas with higher dirt, break down and remove dirt, thereby increasing cleaning efficiency and reducing cleaning time
Jet speed and pressure
For sandblasting or shot blasting rust removers, the speed and pressure of the jet directly determine the force of the abrasive hitting the metal surface, thereby affecting the effect and efficiency of rust removal.
processing time
The length of time the rust remover is applied to the metal surface will affect the thoroughness of the rust removal. If the time is too short, the rust may not be completely removed, while if the time is too long, it may result in over-treatment.
Detergent concentration
The concentration of the cleaning agent is also an important factor affecting the rust removal effect. Within a certain range, the higher the concentration of the cleaning agent, the better the rust removal effect. This is because a high concentration of cleaning agent can more effectively decompose and remove dirt, thus improving the rust removal efficiency.
The degree of rust on the metal surface
Rust removal results will vary depending on the severity of the initial rust. Severely rusted surfaces may require multiple treatments to achieve the desired effect.
Metal Material
Different metal materials have different properties such as hardness and toughness, and react differently to rust removal treatments.
Equipment performance and maintenance
The stability, sealing and working condition of each component of the equipment will affect the rust removal effect. For example, a blocked or worn spray gun may cause uneven spraying.
Setting of operating parameters
Whether the operating parameters, including the spray angle and distance, are set properly will affect the contact effect between the abrasive and the metal surface.
In summary, through reasonable methods, the rust removal effect of the non-acid cleaning rust removal machine can be effectively improved . If you want to know more about the non-acid cleaning rust removal machine , please contact Wandeshun Machine!
https://www.chinawiredrawingmachine.com/
