What should be paid attention to in the maintenance and care of the inverted wire drawing machine?
Clean regularly
Thoroughly remove dust, oil and metal debris from the equipment surface, reel, mold base and other parts.
Pay special attention to cleaning the fine metal particles generated during the wire drawing process to prevent them from entering the interior of the equipment and causing wear.
Lubrication management
According to the requirements of the equipment manual, regularly add appropriate amount of lubricating oil or grease to each lubrication point.
Check the sealing of the lubrication system to avoid lubricating oil leakage and impurities.
Mould inspection and replacement
Check the wear of the wire drawing die regularly. If there is excessive wear, damage or scratches, replace it in time.
Newly installed molds must be ensured to be installed firmly and positioned accurately.
Electrical system maintenance
Check the connections of wires and cables regularly to see if they are loose to prevent heat or short circuits caused by poor contact.
Clean the dust inside the electrical control box to maintain good heat dissipation of electrical components.
Transmission parts maintenance
Check the tension and wear of transmission parts such as belts, chains, gears, etc., and adjust or replace them as appropriate.
Ensure that transmission parts are adequately lubricated to reduce wear and noise.
Cooling system maintenance
Check whether the cooling water pipeline is unobstructed and whether there is any water leakage.
Replace the coolant regularly to ensure the cooling effect.
Equipment accuracy calibration
Regularly calibrate the drawing machine's drawing speed, tension and other parameters to ensure the stability of product quality.
Check the installation level of the equipment and the relative positions of various components to prevent deviations from affecting working accuracy.
Safety device inspection
Confirm that safety devices such as safety protection doors and emergency stop buttons are functioning properly to ensure the safety of operators.
Storage environment
When the equipment is not in use, it should be stored in a dry, well-ventilated environment to avoid moisture and rust.
Recording and analysis
Establish maintenance records, recording in detail the content of each maintenance and problems found.
Analyze frequently occurring problems, identify the root causes, and take targeted improvement measures.
If you find that the wire drawing machine makes abnormal noise during operation, you should add lubricating oil or replace parts in time to prevent the problem from further deteriorating and affecting production. Maintenance and care are the guarantee of stable operation of the inverted wire drawing machine. Wandeshun Machine 's inverted wire drawing machine not only has outstanding performance, but also has a professional team to customize exclusive maintenance plans for you. Choose Wandeshun Machine and achieve the future!
https://www.chinawiredrawingmachine.com/
