Anyone who has used a wire drawing machine knows that the wire drawing machine consumes a lot of power. This power consumption is mainly caused by the heating work of the wire drawing machine barrel. Since the heating ring is required to be heated first, and then the heat is transferred to the barrel of the wire drawing machine, it is inevitable that a part of the heat will flow out during the heat conduction time, and the wasted heat is actually It's wasting power.
Others, because the outer surface of the heating ring will definitely touch the gas, in other words, a part of the calorific value will be wasted in the gas, which is equivalent to wasting electricity. The wire drawing machine only damages the utility bill by nearly 40% in terms of heat conduction in the heating coil part.
In order to better apply the wire drawing machine, it can also save energy and save electricity. You can use a product called an electromagnetic heater, just wrap a layer of thermal insulation material on the surface of the barrel of the wire drawing machine, and then add a layer of electromagnetic induction heating electromagnetic coils. After plugging in, electromagnetic induction adds electromagnetic coils. The magnetic effect of the current occurs, and the barrel is automatically hot.
Since the temperature converted by the existence of the thermal insulation material is not easily transferred into the gas, the electric energy is saved in this way. Compared with the heating coil, the electromagnetic heater can save at least 30% of the electricity, which is very economical and economical. It is cost-effective, and the heating rate is very ideal. At this stage, it is the best working partner of the wire drawing machine.
www.chinawiredrawingmachine.com
