The operation of the belt sander is relatively simple, but you need to pay attention to safety and correct operation steps. The following is the general operation process of the belt sander:
1. Preparation: Make sure the belt sander is on a stable work surface and connected to the power supply.
Check whether the abrasive belt is installed correctly, properly tensioned, and whether it is damaged or severely worn.
2. Adjustment settings: Adjust the speed and tension of the conveyor belt according to the processing requirements. Generally speaking, rougher processing requires higher speeds, while more delicate processing requires lower speeds. According to the size and shape of the workpiece, adjust the height and angle of the worktable to ensure that the workpiece can be placed firmly on the worktable and in good contact with the abrasive belt.
3. Safety protection: Wear personal protective equipment, including safety glasses, gloves and earplugs.
Make sure the belt sander's safety guards are in place, such as guards and emergency stop switches, to prevent accidents.
4. Start the operation: Turn on the power of the belt sander and start the equipment step by step. Place the workpiece on the workbench and make sure that the surface of the workpiece in contact with the belt is in a suitable position. Use appropriate pressure and moving speed to move the belt along the surface of the workpiece to perform grinding or polishing operations. Be careful not to apply excessive pressure to avoid damaging the workpiece or the belt.
5. Monitor operation: Continuously monitor the workpiece during processing and the operating status of the belt sander to ensure that everything is normal.
If there is any abnormal situation, stop the belt sander immediately and check and deal with it.
6. Complete the operation: After completing the processing, turn off the power of the belt sander and wait for the equipment to stop running completely.
Remove the workpiece from the workbench and clean the work area to ensure it is safe and tidy.
When operating a belt sander, you must strictly abide by the operating procedures and safety operating regulations to ensure the safety of yourself and others.
https://www.chinawiredrawingmachine.com/
