1. Installation of mechanical equipment is familiar with the skilled workers. 2 . Required to install the circulating oil pipeline. 3 . Motors, electrical requirements must be well grounded. 4 . Foot switch is used to wear when used for die leader . The wire drawing unit can also be composed of 6 sets, 8 sets, etc. as a group, which can be determined according to the needs of users. If the license plant area, distance of the two machines 200 is ~ 400mm is appropriate, but the 10 minimum length of units 12 is m. The equipment is installed according to the foundation plan. Check whether the lubricating oil of each bearing is sufficient, inject the gear oil into the transmission until the proper amount, check whether the screws are loose, whether the wire part of the drawing pan is smooth, click the switch to see whether the steering is positive, and then start the production after the inspection is completed.
https://www.chinawiredrawingmachine.com/
