It can process round wire rods and threaded steel bars with a diameter of 4-14mm . At the same time, it can also straighten and cut stainless steel wire, aluminum wire, cold drawn wire, etc. The incision is neat and the error is small. The error is ±5 mm. 120 meters, is a highly automated steel straightening and cutting device. At present, the steel bar straightening machine adopts numerical control technology to control the straightening and cutting process of the steel bar. By setting the cutting length and quantity, the cutting machine can automatically complete the work process of the batch. The steel bar straightening machine cutting machine is equipped with a fixed-length fixed-length board. When in use, adjust the position of the fixed-length plate on the tie rod according to the length to be cut, and then adjust the pressure of the tie rod spring to make the steel bar move forward to estimate the long plate, and the cutting table can be reset in time after the steel bar is cut. When the fixed-length board moves forward to a certain position, the fixed-length board drives the pull rod to move, and the cutting table is dragged to cut the steel bars. When cutting the steel bar, the cutter head is reset by the spring on the pull rod. After the steel bar is cut, the receiving frame is opened to discharge. After the steel bar is cut, the receiving rack is closed. The cutting process of a single steel bar is completed.
https://www.chinawiredrawingmachine.com/
