Y27-315ton Deep Drawing and Forming Hydraulic Press Machine for Wheelbarrow/Trolley

We continue to develop and innovate with an honest attitude and professional technology, which provides a strong guarantee for the continuous optimization of the quality of our take-up machine for wire drawing, Straight drawing machines, Automatic Nail Making Machines. We earnestly carry out the contract, and we are a creditable enterprise with good market reputation and honest management. We care about our employees and provide them with opportunities to develop and improve themselves so as to achieve the common development of employees and the company. Our company has always adhered to the implementation of the brand strategy, with intelligent production systems, achieving successful launch of products to the market. Our merchandise have superior popularity from the whole world as its most competive cost and our most advantage of after-sale assistance for the clients.

Model: 24DT/A Fine wire drawing machine with continuous annealing

A. Main components machine

1.24DT/A wire drawing machine  1 set

2.Electrical cabinet           1 set

3.Pay-off                      1 set

4.Cart                         1 set

5.Steam generator              1 set

6.User's manual(specification, instruction, machine structure drawing, die arrangement, foundation drawing, fault resolution, maintain-ance, consumables drawing, electrical drawing, frequency instruction)                   1 set

7.Spare parts          

B. Main technique parameter

1． Usage: Bare copper

2. Inlet diameter: Ф2.0mm-Ф0.8mm

3. Outlet diameter:  Ф0.60mm-Ф0.20mm

4. Maximum drawing speed: 2000MPM/MAX

6.  Dies

Number: 24 dies (Customer self provided)  Ф25mm*8—12mmT

No. 1 is independent; No.2~23 are made of cast iron

Pedestal can be adjusted according to the capstan

7. Mechanism surface reduce rate:

From No.1 to No.23         13%

No.22          8% 

8. Drawing method:  4 spools horizontal arrangement;

9. Motor: Drive motor 30HP(22KW) AC frequency converter control

Spooling motor 7.5HP(5.5KW)AC frequency converter control

10. Annealing voltage: D.C. 60V

11. Annealing ampere: D.C. 600A/MAX

12. Annealing power: 36KVA

13. Annealing method: D.C. three-section annealing

14. Frame: Welded by steel plate

15. Transmission: All transmission by timing belts;

16. Capstan: Tungsten coated; four 10-tier capstans; one single tier capstan for final drawing, with extra keyslot

17. Lubrication system: Spray type; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.24 Die

18. Spool dimension: Outer diameter Ф300mm; (according to customer’s requirements)

19. Capacity for spool receiving: 50-60KG

20. Spooling control method: Weight balance by swing arm; automatically revise spooling tension

21. Bobbin loading & unloading type: single bobbin fixed with screw (with loading &unloading cart)

22. Traversing unit: 

Traversing system: 110W synchronizing motor traversing; slide-rail bearing

Traversing width: 270mm/Max

23. Brake: 20 KG-M magnetic brake 

24. Protection cover: Grille for transmission area; Stainless steel plate for drawing area;

 Sealed cover with 3 inspection windows for spooling area.

25. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;

26. Power source: Three-phase 415V 50HZ(made according to customer’s requirements)

27. Electric control cabinet: 1000L*800W*2000H(mm)

28. Machine Dimension: 3500L*1600W*1700H (mm)

29. Net weight: 3000KG;

C.  Our Main Products

D.  Spare parts list

1. The tool to disassemble capstan                   1 set

2. Quakeproof cushion                                4 sets

3. Special wrench                                    1 set

4. Weight adjuster                                   1 set

5. Porcelain hole                                    3 sets

7. Pulley                                            1 unit

8. Carbon brush                                      6 sets

9. Sealing strip                                     1 unit

10. Fuse                                             3 sets

11. Nickel belt

Just contact us for detailed information without hesitate, I will reply you quickly.

Wuxi Wandeshun Machine Co., Ltd

Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China

Tel:86-510-85260990

Mobile:86-13921534531

       86-13806184032

       86-13915322227

Fax:86-510-85261990

Email:sales@wxwds.com

Since the establishment, our company has always focused on the development, production, sales and service of various Y27-315ton Deep Drawing and Forming Hydraulic Press Machine for Wheelbarrow/Trolley. We will continue to focus on the development of power metering products, combining the company's business strategy and human resources strategy to better contribute to the vigorous development of the industry. Our company adheres to the business philosophy of 'let products speak, operate with quality, always put the interests of customers first' and make customers get ideal returns with strict management and high-quality products.

Hot Tags: welding wire drawing machine/zinc alloy wire drawing machine, China, manufacturers, suppliers, factory, made in China, copper wire annealing machine, straight wire drawing line, wire drawing jobs, steel wire drawing process, Pulley Type Mild Steel Wire drawing, Single Chain Drawing Machine