After you confirm the order with us, wire manufacturing machine, Free Stop Fine Stretch Machine, Hydraulic Automatic Drawing Machine will be delivered at the time negotiated by both parties by default. The delivery time is fast and the price is reasonable. We have always been at the forefront of technology, closely following the market and customer needs, focusing on independent innovation and new product development. We are striving to reach the goal of satisfying consumers, employees, society and investors, and sincerely look forward to all cooperation. We have a wealth of industry experience, and we use technology and reputation to establish a complete and practical distribution management system. We have extensive exchanges and cooperation with all walks of life, so that technology and equipment always meet the needs of the rapidly changing market, and in the same industry in a leading position.
Automatic wire nail making machine directions (application)
The water-tank series wire-drawing machine is in wet type to draw low-, mid-, and high-carbon steel wires,as well as non-ferrous. With swift speed, high quality and good reputation, it's the most ideal equipment for steel wires and ropes, galvanized wires, and electric wires manufaturers.
2M6-6 Cutting tool grinder
SD-400 Nail Polishing machine
Wire-laying frame
Model | Units | SD-400 | SD-600 | SD-700 | SD-1000 | SD-2000 |
Capacity | kg | 400 | 600 | 700 | 1000 | 2000 |
Motor power | kw | 3-4 | 4.5-5.5 | 5.5-7.5 | 5.5-7.5 | 11-15 |
Overall size | mm | 1640x900 | 1800x1000 | 1900x1050 | 2000x1500 | 2500x1500 |
Note:For special steel wire process machines and other auxiliary equipment, the custom-made service be made to buyer's requirements.
Main Specifications | Units | BJ23-40 Cap-striking machine |
Productivity | pcs/min | 5x70 |
Capacity | kw | 5.5 |
Motor power | kg | 3000 |
Overall dimensions | mm | 2400x1500x1700 |
Note:This machines is specially used to make the head part (umbrella-shaped head) of a roofing nail. It features advanced mechanism, easier operation and higher capacity. | ||
Main Specifications | Units | GS-B Type high-speed thread rolling machine |
Thread rolling diameters | mm | ø2.0-3.1 |
Working length | mm | 12.5-90 |
Productivity | pcs/min | 600-1000 |
Total weight | kg | 1500 |
Power of motor | kw | 5.5-7.5 |
Overall dimensions | mm | 1420x1220x1450 |
Note:This machines is specially used to thread the nail shanks in annular & twisted forms. | ||
Model | BGD25-1 | BGB50-2 |
Load of roller | 20-25kg | 100kg |
Time control | For more than 0-120 minutes(min) | |
Roller Speed | 7-9 r/min(r/min) | |
Note:This machines is specially used to get roofing nails, concrete nails and gun, etc. electro galvanized. | ||
ZL-A Wire Nail Alignment Packing Feeder
This machines, as a new generation of wire nail packing nuit, is applied to the assistance of nail packing. The wire nails can be trimly packed into cartons, which not only reduces the labour intensity of operators, increases the productivity but lessen the packing volume as well as the cost of packing materials.
ZL-A Wire Nail Alignment Packing Feeder
Model | ZL-A |
Nail length | 60-120mm |
Weight | 1000kg |
Overall dimensions | 2000x2000x1800mm |
JD100 Automatic Coil Nail Welder
This coil nail welder is automatic welding equipment. The nail set in the vibrating feeder are aligned in orderly way under vibration. Through a feeding track, it slides into welding wires to form collated nails. After that, the collated nail strip goes through automatic oil dipping and rust proof unit, drying & counter device, and next are rolled into coil nail (in flat or cone forms). The coil nails are cut off according to a set number of nails, and each coil is finally bound with a rubber band and packed into cartons by operators.
This equipment adopts such high-tech parts as the PLC of Mitsubishi make, Japan and the touch type display of DIGITAL formula, etc., which conduct an automatic test on process flows like lack of raw materials, nail's skip, counting and cutting, etc. These high-tech components cause the whole system to act accurately, reliably and make the product quality steady.
Main Specifications
| Designation | Specifications | Designation | Specifications |
Weldng wire | For coil nail welding | Working power | 3 phase AC220V 50-60HZ 10KVA 3phase |
Vibrating feeder | for nail size nuder d2.1×50 | Welding power | DC300-350V |
Air pressure | ≥4kg/cm2 | Rated power | 8KVA |
Cooling water | 2Liters/min | Max. power | 30KVA |
Working area | 2700x850 | Working cycle | 7% |
Total weight | Approx. 1500kgs | Welding current | 1500A-2000A（secondary side） |
Should you're in need of quality and stable wire nail making machine for wooden made in China, welcome to buy the machine from our factory. We are one of the leading such manufacturers and suppliers in China, equipped with advanced equipment and technology. Welcome to contact us.
We strive to make conscientious products and do every detail of the Nails Machine Small Automatic Nail Making Machine (In Pakistan/ Italy/Kenya/India), let users rest assured and continue to create value for customers, thereby achieve the goal of win-win cooperation. We have always been at the forefront of technology, closely following the market and customer needs, focusing on independent innovation and new product development. The safety concept is our company's attitude and guideline to adhere to safe development and build an intrinsically safe enterprise.
Hot Tags: wire nail making machine for wooden, China, manufacturers, suppliers, factory, made in China, Used wire drawing machines, construction nail making machine, Steel Drawing Machine, copper wire draw machine, copper fine wire drawing machine, steel wire straight line drawing machine
