With a struggling-oriented corporate culture, we continuously improve the development of the enterprise, and make the best wire drawing machine Straight Drawing Machine, wire straightening and cutting machine ludhiana, Wire Drawing Machine Line. Our company has seen a lot of changes in the past years of business. We adopt the business philosophy of quality, innovation, integrity and win-win. Our company maintains a steady annual growth rate. 'Careful, attentive, quality is always satisfactory' is the spirit of our company, which is reflected in the pace of our company's sustainable development and in the relationship with customers, partners, internal staff and competitors.
Automatic wire nail making machine directions (application)
The water-tank series wire-drawing machine is in wet type to draw low-, mid-, and high-carbon steel wires,as well as non-ferrous. With swift speed, high quality and good reputation, it's the most ideal equipment for steel wires and ropes, galvanized wires, and electric wires manufaturers.
2M6-6 Cutting tool grinder
SD-400 Nail Polishing machine
Wire-laying frame
Model | Units | SD-400 | SD-600 | SD-700 | SD-1000 | SD-2000 |
Capacity | kg | 400 | 600 | 700 | 1000 | 2000 |
Motor power | kw | 3-4 | 4.5-5.5 | 5.5-7.5 | 5.5-7.5 | 11-15 |
Overall size | mm | 1640x900 | 1800x1000 | 1900x1050 | 2000x1500 | 2500x1500 |
Note:For special steel wire process machines and other auxiliary equipment, the custom-made service be made to buyer's requirements.
Main Specifications | Units | BJ23-40 Cap-striking machine |
Productivity | pcs/min | 5x70 |
Capacity | kw | 5.5 |
Motor power | kg | 3000 |
Overall dimensions | mm | 2400x1500x1700 |
Note:This machines is specially used to make the head part (umbrella-shaped head) of a roofing nail. It features advanced mechanism, easier operation and higher capacity. | ||
Main Specifications | Units | GS-B Type high-speed thread rolling machine |
Thread rolling diameters | mm | ø2.0-3.1 |
Working length | mm | 12.5-90 |
Productivity | pcs/min | 600-1000 |
Total weight | kg | 1500 |
Power of motor | kw | 5.5-7.5 |
Overall dimensions | mm | 1420x1220x1450 |
Note:This machines is specially used to thread the nail shanks in annular & twisted forms. | ||
Model | BGD25-1 | BGB50-2 |
Load of roller | 20-25kg | 100kg |
Time control | For more than 0-120 minutes(min) | |
Roller Speed | 7-9 r/min(r/min) | |
Note:This machines is specially used to get roofing nails, concrete nails and gun, etc. electro galvanized. | ||
ZL-A Wire Nail Alignment Packing Feeder
This machines, as a new generation of wire nail packing nuit, is applied to the assistance of nail packing. The wire nails can be trimly packed into cartons, which not only reduces the labour intensity of operators, increases the productivity but lessen the packing volume as well as the cost of packing materials.
ZL-A Wire Nail Alignment Packing Feeder
Model | ZL-A |
Nail length | 60-120mm |
Weight | 1000kg |
Overall dimensions | 2000x2000x1800mm |
JD100 Automatic Coil Nail Welder
This coil nail welder is automatic welding equipment. The nail set in the vibrating feeder are aligned in orderly way under vibration. Through a feeding track, it slides into welding wires to form collated nails. After that, the collated nail strip goes through automatic oil dipping and rust proof unit, drying & counter device, and next are rolled into coil nail (in flat or cone forms). The coil nails are cut off according to a set number of nails, and each coil is finally bound with a rubber band and packed into cartons by operators.
This equipment adopts such high-tech parts as the PLC of Mitsubishi make, Japan and the touch type display of DIGITAL formula, etc., which conduct an automatic test on process flows like lack of raw materials, nail's skip, counting and cutting, etc. These high-tech components cause the whole system to act accurately, reliably and make the product quality steady.
Main Specifications
| Designation | Specifications | Designation | Specifications |
Weldng wire | For coil nail welding | Working power | 3 phase AC220V 50-60HZ 10KVA 3phase |
Vibrating feeder | for nail size nuder d2.1×50 | Welding power | DC300-350V |
Air pressure | ≥4kg/cm2 | Rated power | 8KVA |
Cooling water | 2Liters/min | Max. power | 30KVA |
Working area | 2700x850 | Working cycle | 7% |
Total weight | Approx. 1500kgs | Welding current | 1500A-2000A（secondary side） |
Should you're in need of quality and stable wire nail making machine for wooden made in China, welcome to buy the machine from our factory. We are one of the leading such manufacturers and suppliers in China, equipped with advanced equipment and technology. Welcome to contact us.
We rely on integrated large-scale manufacturing capabilities and advanced management concepts to provide customers with high quality Nail Making Machine for Steel/Concrete/Wooden Nail Making. We always focus on customer needs and develop and manufacture products that satisfy customers. Customers are welcome to put forward their valuable opinions on our products and services. Just one phone call from you, our pre-sale service system will start and we will serve you wholeheartedly.
Hot Tags: wire nail making machine for wooden, China, manufacturers, suppliers, factory, made in China, Hot wire drawing machine, tmt straightening and cutting machine, stainless steel wire cold drawing, pulley steel wire drawing machine, Electrical Wire Making Machine, Wire Straightening Machine
