Hot Sale PP PE Raffia Film Flat Yarn Net Yarn Extruder Wire Drawing Making Machine Equipment

'Professional focus, wholeheartedly for you' is our company's service tenet, and instill into every employee of our company, so as to ensure that our high speed copper plated wire drawing machine, Heavy Wet Water tank Drawing Machine, tyre wire drawing machine can meet the requirements of customers. So you should make contact with us by sending us emails or call us when you've got any questions about our organization. Our company gradually improves the market share at the same time, from time to time we communicate with users with the international new technology trends and products, and bring new product results to users.

Electrical Wire Making Machine introduction 

Wandeshun Machine is one of the leading wire drawing machine manufacturers in China , is specialized in various manufacturing wire drawing machines, have already been exported to Vietnam , Indonesia, Uzbekistan Kenya, South Africa, Algeria, Egypt, Iran, Turkey and so on.

copper rod breakdown  wire drawing machine (450/LT9) 

number of dies:9

installed capacity:125KVA (Main motor:AC.110KW,spooler motor:15KW)

drive: frequency inverters

Dimension length 3000 * 1800mm Weight 6.5T width  

This company produces LT9-450 continuous annealing line used with pull-plus double-disc received Continuous Annealing Line (or, as the nose unloading line) production model, the formation of the entire production line continuous operation, drawing machine from a copper rod into the line of direct pull 8.00mm Model copper wire.

Annealing mode DC-annealing, annealing the use of advanced low-voltage power supply high current power supply, the control system adopts microcomputer intelligent control, equipment operation more stable, the maximum speed of 8 m / sec.

LT-1200 large Pull continuous annealing line supporting equipment as follows

Actinomyces gantry frame wear die rolling machine 110KW motor control cabinet tip LT-9 mold copper big pull 

LT-1200 annealing machine LT-1200 cabinet annealing operation of the main electrical cabinet automatic double-disc MD-up Machine XB-600 like the nose and unloading-ray machine (also purchased) can store 1 tonne of copper wire used in the production line when a large single-core BV capacity pay-off.

Specifications

LT9-450Copper Large Pull with continuous annealing production line

copper rod breakdown machine;rod breakdown machine;8mm copper rod dawing machine

From 8mm to 1.78mm—3.30mm

copper rod input diameter:8mm,

output diameter: 1.78mm—3.30mm

production speed:480meters/s 

production capacity: 1200KG/hour

LT-15DieHigh-speed copper drawing machine Main technical parameters:

Our Advantages

a. Extensive production experience: we are specialized in all kinds of wire drawing machine with an experience of 10 years.

b. Complete production facilities: owning precision centerless grinding machine, straightening machine, fine polishing machine, precision lathe, milling and drilling machine, roller press and other advanced equipments. Our technicians will do regular scheduled maintenance on these machines to guarantee them work well.

c. High quality raw material: we mainly choose good supplier from big company, such as ABB , Siemens 

d. Strict Physical/Chemical testing procedures: meeting the requirements of the product design and process, providing reliable testing data.

e. Short Delivery time: If one container 15-20 days. 

g. Best after-sale service: Over 60% products are sold to the Southeast Asia, Middle East and Europe, and all products are trusted by domestic and foreign customers.

Quality control

1. Checking raw material before producing.

2. Checking one by one before the assebling 

3. Checking one by one during the production

4. Have the random inspection before the delivery.

Testing standard

Salt Spray test :after 72hours ,no corrosion on surface 

No damage on espag rod surface.

Espag rod over hauling and found:

After 25000times repeatedly opening and closing ,espag rod parts have no distortion ,no deformation and do not affect the normal use of espag rod.

FAQ

1. Q：How you arrange shipment?

A：By Sea/By Train/By Air or By Express,15-20days Against Deposit.

2. Q：What kinds of material you can produce?

A：The dominant material we cast is stainless steel, duplex stainless steel, carbon steel, ductile cast iron, aluminum, copper, bronze, brass and alloy metal etc. etc.  

3. Q：What is the delivery time of pattern, casting parts and machining finished parts?

A：In general, pattern making time is 20-40 days base on the design of the parts, sample making time is 20-30 days, machining finished parts lead time is 40-60 days. The lead time will vary base one different design and weight of the parts, please contact us for details.

4. Q：How is your goods quality?

A：We cooperated with many world class companied for many years, for examples, Stertil B.V., LKL, FLOWSERVE, Ruhrpump, Hitachi, Swater, GE, CAT, WKM etc. our products received good response from our customers.

5. Q： What kinds of physical and chemical testing you can provide?

A：The physical and chemical testing we provide include:

    chemical composition testing

    physical property testing：hardness test，Tensile performance testing, room temperature impact testing, low temperature impact test

    NDT: PT, MT, UT &RT

    Metallographic testing

6. Q：What equipment do you have for NDT inspection?

A：We have ultrasonic flaw detector, av miniature magnetic yoke detector, magnetic detector and penetration detector.

Please feel free to send us your detailed requirements, you would be satisfied with our service.

Contact Below:

Wuxi Wandeshun Machine Co., Ltd

Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China

Tel:86-510-85260990

Mobile:86-13921534531

       86-13806184032

       86-13915322227

Fax:86-510-85261990

Email:sales01@wxwds.com

We recognize that our Hot Sale PP PE Raffia Film Flat Yarn Net Yarn Extruder Wire Drawing Making Machine Equipment need to be improved in order to remain competitive in the marketplace. After years of hard work and exploration, we now have domestic advanced production equipment and technology, which are widely used in many fields. After years of steady development, we have established strategic cooperation relationship with many famous brands at home and abroad. We hope that in the future, we will become your best partner and grow together.

Hot Tags: electrical wire making machine, China, manufacturers, suppliers, factory, made in China, Continuous Pulley Wire Drawing Machine, schnell wire straightening and cutting machine, pipe drawing machine, wet tank wire drawing machine, multi wire drawing machine, Used wire drawing machines