We will adhere to the motto of 'Serve mankind with science and technology, and win respect with integrity', and strive to become a creator of excellent quality and a pioneer in the Steel Wire Rod Wire Drawing Machine, Medium drawing machine, Pulley Type Dry Wire Drawing Machine industry! We not only establish the physical experience center, but also develop the Internet e-commerce platform. We seek credibility with good quality, develop with good reputation, and keep developing. Due to the complete specifications and stable performance of the products, it has been sold well abroad and all over the country and has been widely praised and trusted by the majority of users.
Automatic wire nail making machine directions (application)
The water-tank series wire-drawing machine is in wet type to draw low-, mid-, and high-carbon steel wires,as well as non-ferrous. With swift speed, high quality and good reputation, it's the most ideal equipment for steel wires and ropes, galvanized wires, and electric wires manufaturers.
2M6-6 Cutting tool grinder
SD-400 Nail Polishing machine
Wire-laying frame
Model | Units | SD-400 | SD-600 | SD-700 | SD-1000 | SD-2000 |
Capacity | kg | 400 | 600 | 700 | 1000 | 2000 |
Motor power | kw | 3-4 | 4.5-5.5 | 5.5-7.5 | 5.5-7.5 | 11-15 |
Overall size | mm | 1640x900 | 1800x1000 | 1900x1050 | 2000x1500 | 2500x1500 |
Note:For special steel wire process machines and other auxiliary equipment, the custom-made service be made to buyer's requirements.
Main Specifications | Units | BJ23-40 Cap-striking machine |
Productivity | pcs/min | 5x70 |
Capacity | kw | 5.5 |
Motor power | kg | 3000 |
Overall dimensions | mm | 2400x1500x1700 |
Note:This machines is specially used to make the head part (umbrella-shaped head) of a roofing nail. It features advanced mechanism, easier operation and higher capacity. | ||
Main Specifications | Units | GS-B Type high-speed thread rolling machine |
Thread rolling diameters | mm | ø2.0-3.1 |
Working length | mm | 12.5-90 |
Productivity | pcs/min | 600-1000 |
Total weight | kg | 1500 |
Power of motor | kw | 5.5-7.5 |
Overall dimensions | mm | 1420x1220x1450 |
Note:This machines is specially used to thread the nail shanks in annular & twisted forms. | ||
Model | BGD25-1 | BGB50-2 |
Load of roller | 20-25kg | 100kg |
Time control | For more than 0-120 minutes(min) | |
Roller Speed | 7-9 r/min(r/min) | |
Note:This machines is specially used to get roofing nails, concrete nails and gun, etc. electro galvanized. | ||
ZL-A Wire Nail Alignment Packing Feeder
This machines, as a new generation of wire nail packing nuit, is applied to the assistance of nail packing. The wire nails can be trimly packed into cartons, which not only reduces the labour intensity of operators, increases the productivity but lessen the packing volume as well as the cost of packing materials.
ZL-A Wire Nail Alignment Packing Feeder
Model | ZL-A |
Nail length | 60-120mm |
Weight | 1000kg |
Overall dimensions | 2000x2000x1800mm |
JD100 Automatic Coil Nail Welder
This coil nail welder is automatic welding equipment. The nail set in the vibrating feeder are aligned in orderly way under vibration. Through a feeding track, it slides into welding wires to form collated nails. After that, the collated nail strip goes through automatic oil dipping and rust proof unit, drying & counter device, and next are rolled into coil nail (in flat or cone forms). The coil nails are cut off according to a set number of nails, and each coil is finally bound with a rubber band and packed into cartons by operators.
This equipment adopts such high-tech parts as the PLC of Mitsubishi make, Japan and the touch type display of DIGITAL formula, etc., which conduct an automatic test on process flows like lack of raw materials, nail's skip, counting and cutting, etc. These high-tech components cause the whole system to act accurately, reliably and make the product quality steady.
Main Specifications
| Designation | Specifications | Designation | Specifications |
Weldng wire | For coil nail welding | Working power | 3 phase AC220V 50-60HZ 10KVA 3phase |
Vibrating feeder | for nail size nuder d2.1×50 | Welding power | DC300-350V |
Air pressure | ≥4kg/cm2 | Rated power | 8KVA |
Cooling water | 2Liters/min | Max. power | 30KVA |
Working area | 2700x850 | Working cycle | 7% |
Total weight | Approx. 1500kgs | Welding current | 1500A-2000A（secondary side） |
Should you're in need of quality and stable wire nail making machine for wooden made in China, welcome to buy the machine from our factory. We are one of the leading such manufacturers and suppliers in China, equipped with advanced equipment and technology. Welcome to contact us.
We hope that we will develop together with you in order to jointly improve the manufacturing High Speed Low Noise U Type Nail Making Machine/Small Factory Nail Making Machine Price and innovative technology level! Our company has a skillful sales team, strong economic foundation, great technical force, advanced equipment, complete testing means, and excellent after-sales services. With the first-class products, excellent service, fast delivery and the best price, we have won highly praise foreign customers.
Hot Tags: wire nail making machine for wooden, China, manufacturers, suppliers, factory, made in China, Straight Line Mild Steel Wire drawing, Pulley Type Mild Steel Wire drawing, copper wire making machine, doll other products, Dry type pulley wire drawing machine, wire making machine
