High Quality Soldering Wire 0.8mm-0.5mm Die Drawing Machine

While increasing our global market influence, we will continue to focus on the quality of our machine for making nail and screw, wet type wire drawing machine, copper wire making machine and services and maintain our good reputation as a customer-centric company. We constantly enhance customer satisfaction and we promise that unqualified products will not leave the factory. Our business has already setup a professional, creative and responsible workforce to develop purchasers together with the multi-win principle. In the future market competition, our company will always follow the service tenet of 'integrity, professionalism, quality and innovation' to further expand production and serve the market. Welcome new and old customers at home and abroad to visit and guide for mutual benefit! We have launched a real-time monitoring and management analysis system for production process control and quality inspection, which provides a favorable guarantee for improving the modern management level of the industry.

Model: 24DT/A Fine wire drawing machine with continuous annealing

A. Main components machine

1.24DT/A wire drawing machine  1 set

2.Electrical cabinet           1 set

3.Pay-off                      1 set

4.Cart                         1 set

5.Steam generator              1 set

6.User's manual(specification, instruction, machine structure drawing, die arrangement, foundation drawing, fault resolution, maintain-ance, consumables drawing, electrical drawing, frequency instruction)                   1 set

7.Spare parts          

B. Main technique parameter

1． Usage: Bare copper

2. Inlet diameter: Ф2.0mm-Ф0.8mm

3. Outlet diameter:  Ф0.60mm-Ф0.20mm

4. Maximum drawing speed: 2000MPM/MAX

6.  Dies

Number: 24 dies (Customer self provided)  Ф25mm*8—12mmT

No. 1 is independent; No.2~23 are made of cast iron

Pedestal can be adjusted according to the capstan

7. Mechanism surface reduce rate:

From No.1 to No.23         13%

No.22          8% 

8. Drawing method:  4 spools horizontal arrangement;

9. Motor: Drive motor 30HP(22KW) AC frequency converter control

Spooling motor 7.5HP(5.5KW)AC frequency converter control

10. Annealing voltage: D.C. 60V

11. Annealing ampere: D.C. 600A/MAX

12. Annealing power: 36KVA

13. Annealing method: D.C. three-section annealing

14. Frame: Welded by steel plate

15. Transmission: All transmission by timing belts;

16. Capstan: Tungsten coated; four 10-tier capstans; one single tier capstan for final drawing, with extra keyslot

17. Lubrication system: Spray type; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.24 Die

18. Spool dimension: Outer diameter Ф300mm; (according to customer’s requirements)

19. Capacity for spool receiving: 50-60KG

20. Spooling control method: Weight balance by swing arm; automatically revise spooling tension

21. Bobbin loading & unloading type: single bobbin fixed with screw (with loading &unloading cart)

22. Traversing unit: 

Traversing system: 110W synchronizing motor traversing; slide-rail bearing

Traversing width: 270mm/Max

23. Brake: 20 KG-M magnetic brake 

24. Protection cover: Grille for transmission area; Stainless steel plate for drawing area;

 Sealed cover with 3 inspection windows for spooling area.

25. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;

26. Power source: Three-phase 415V 50HZ(made according to customer’s requirements)

27. Electric control cabinet: 1000L*800W*2000H(mm)

28. Machine Dimension: 3500L*1600W*1700H (mm)

29. Net weight: 3000KG;

C.  Our Main Products

D.  Spare parts list

1. The tool to disassemble capstan                   1 set

2. Quakeproof cushion                                4 sets

3. Special wrench                                    1 set

4. Weight adjuster                                   1 set

5. Porcelain hole                                    3 sets

7. Pulley                                            1 unit

8. Carbon brush                                      6 sets

9. Sealing strip                                     1 unit

10. Fuse                                             3 sets

11. Nickel belt

Just contact us for detailed information without hesitate, I will reply you quickly.

Wuxi Wandeshun Machine Co., Ltd

Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China

Tel:86-510-85260990

Mobile:86-13921534531

       86-13806184032

       86-13915322227

Fax:86-510-85261990

Email:sales@wxwds.com

With an international vision and global service capabilities, we strive to provide customers with cost-effective High Quality Soldering Wire 0.8mm-0.5mm Die Drawing Machine products. We believe that through our joint efforts, the business between us will bring us mutual benefit. With strong technical strength, rich production experience, perfect service system, and brand-new marketing concept, our products are deeply loved by customers at home and abroad.

Hot Tags: welding wire drawing machine/zinc alloy wire drawing machine, China, manufacturers, suppliers, factory, made in China, steel bar straightening and cutting machine, Welding wire drawing mach, nail maker machine, pulley steel wire drawing machine, wire drawing machine for aluminium, wet wire drawing machine line