High Quality Metal Fastener Brass Knurled Dowel Cylindrical Pin

We always take market opportunities as our guide and considerate service as our carrier to strictly control the quality of our bti wire straightening and cutting machine, CNC straightening and cutting machine, Dry wire drawing machine. Our company creates an educational environment of continuous motivation, courage and enterprising, lifelong learning, and pursuit of career achievement, so as to build a high-efficiency and low-cost education environment. We hope to continuously enhance our voice and influence in the industry and become an enterprise with outstanding core competitiveness. Since the establishment of the company, in the process of wholeheartedly providing high-quality products and services for customers, our company always adheres to the first strategy of enterprise development with information resources, drives product innovation with service innovation and quality innovation with scientific and technological progress. We have established a network sales and service department and implemented network-based scientific management.

Model: 24DT/A Fine wire drawing machine with continuous annealing

A. Main components machine

1.24DT/A wire drawing machine  1 set

2.Electrical cabinet           1 set

3.Pay-off                      1 set

4.Cart                         1 set

5.Steam generator              1 set

6.User's manual(specification, instruction, machine structure drawing, die arrangement, foundation drawing, fault resolution, maintain-ance, consumables drawing, electrical drawing, frequency instruction)                   1 set

7.Spare parts          

B. Main technique parameter

1． Usage: Bare copper

2. Inlet diameter: Ф2.0mm-Ф0.8mm

3. Outlet diameter:  Ф0.60mm-Ф0.20mm

4. Maximum drawing speed: 2000MPM/MAX

6.  Dies

Number: 24 dies (Customer self provided)  Ф25mm*8—12mmT

No. 1 is independent; No.2~23 are made of cast iron

Pedestal can be adjusted according to the capstan

7. Mechanism surface reduce rate:

From No.1 to No.23         13%

No.22          8% 

8. Drawing method:  4 spools horizontal arrangement;

9. Motor: Drive motor 30HP(22KW) AC frequency converter control

Spooling motor 7.5HP(5.5KW)AC frequency converter control

10. Annealing voltage: D.C. 60V

11. Annealing ampere: D.C. 600A/MAX

12. Annealing power: 36KVA

13. Annealing method: D.C. three-section annealing

14. Frame: Welded by steel plate

15. Transmission: All transmission by timing belts;

16. Capstan: Tungsten coated; four 10-tier capstans; one single tier capstan for final drawing, with extra keyslot

17. Lubrication system: Spray type; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.24 Die

18. Spool dimension: Outer diameter Ф300mm; (according to customer’s requirements)

19. Capacity for spool receiving: 50-60KG

20. Spooling control method: Weight balance by swing arm; automatically revise spooling tension

21. Bobbin loading & unloading type: single bobbin fixed with screw (with loading &unloading cart)

22. Traversing unit: 

Traversing system: 110W synchronizing motor traversing; slide-rail bearing

Traversing width: 270mm/Max

23. Brake: 20 KG-M magnetic brake 

24. Protection cover: Grille for transmission area; Stainless steel plate for drawing area;

 Sealed cover with 3 inspection windows for spooling area.

25. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;

26. Power source: Three-phase 415V 50HZ(made according to customer’s requirements)

27. Electric control cabinet: 1000L*800W*2000H(mm)

28. Machine Dimension: 3500L*1600W*1700H (mm)

29. Net weight: 3000KG;

C.  Our Main Products

D.  Spare parts list

1. The tool to disassemble capstan                   1 set

2. Quakeproof cushion                                4 sets

3. Special wrench                                    1 set

4. Weight adjuster                                   1 set

5. Porcelain hole                                    3 sets

7. Pulley                                            1 unit

8. Carbon brush                                      6 sets

9. Sealing strip                                     1 unit

10. Fuse                                             3 sets

11. Nickel belt

Just contact us for detailed information without hesitate, I will reply you quickly.

Wuxi Wandeshun Machine Co., Ltd

Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China

Tel:86-510-85260990

Mobile:86-13921534531

       86-13806184032

       86-13915322227

Fax:86-510-85261990

Email:sales@wxwds.com

We will continue to provide the public with impeccable and incomparable High Quality Metal Fastener Brass Knurled Dowel Cylindrical Pin, and strive to meet consumer demand. Enterprises of 'quality of survival, the credibility of development' for the purpose, sincerely welcome domestic and foreign businessmen to visit to discuss cooperation. We will continue to emphasize that client requirements are the content of the service and that client satisfaction is the service principle of quality standards.

Hot Tags: welding wire drawing machine/zinc alloy wire drawing machine, China, manufacturers, suppliers, factory, made in China, Low Carbon Dry Wire Drawing Machine, Wet wire drawing machine for stainless steel wire, nails making machine for africa market, draw bench machine, copper wire cutting machine, Medium Wire drawing machine