We have always prioritized the improvement of straightening cutting machine, used wire straightening and cutting machine in india, wire straightening and cut off machine quality over quantity growth, because only with quality can we attract more customers. We have been chosen as the only supplier of long-term cooperation by many enterprises at home and abroad. We are committed to pursuing the effect of product excellence. The competitive society makes us breathless sometimes. The life full of bitterness and bitterness makes us confused sometimes. My team makes every product with sincerity.
Wire manufacturing machine introduction
Wandeshun Machine is one of the leading wire bunching machine manufacturers in China , is specialized in various manufacturing wire drawing machines, have already been exported to Vietnam , Indonesia, Uzbekistan Kenya, South Africa, Algeria, Egypt, Iran, Turkey and so on.
copper rod breakdown wire drawing machine (450/LT9)
number of dies:9
installed capacity:125KVA (Main motor:AC.110KW,spooler motor:15KW)
drive: frequency inverters
Dimension length 3000 * 1800mm Weight 6.5T width
This company produces LT9-450 continuous annealing line used with pull-plus double-disc received Continuous Annealing Line (or, as the nose unloading line) production model, the formation of the entire production line continuous operation, drawing machine from a copper rod into the line of direct pull 8.00mm Model copper wire.
Annealing mode DC-annealing, annealing the use of advanced low-voltage power supply high current power supply, the control system adopts microcomputer intelligent control, equipment operation more stable, the maximum speed of 8 m / sec.
LT-1200 large Pull continuous annealing line supporting equipment as follows:
Actinomyces gantry frame wear die rolling machine 110KW motor control cabinet tip LT-9 mold copper big pull
LT-1200 annealing machine LT-1200 cabinet annealing operation of the main electrical cabinet automatic double-disc MD-up Machine XB-600 like the nose and unloading-ray machine (also purchased) can store 1 tonne of copper wire used in the production line when a large single-core BV capacity pay-off.
Specifications
LT9-450Copper Large Pull with continuous annealing production line
copper rod breakdown machine;rod breakdown machine;8mm copper rod dawing machine
From 8mm to 1.78mm—3.30mm
copper rod input diameter:8mm,
output diameter: 1.78mm—3.30mm
production speed:480meters/s
production capacity: 1200KG/hour
LT-15DieHigh-speed copper drawing machine Main technical parameters:
Inlet wire diameter | 3.00mm |
Outlet diameter | 0.5mm—2.90mm |
Drawing number | 15 |
Power | 30KW |
Maximum speed | 600m/min |
Fixed speed wheel diameter | 350 mm |
Hourly output | 1000kg/h |
Experience and markets:
Our factory has more than 20years working experiences on researching and selling. Products are well sailed all over the world, got many compliments from customers.
OUR SERVICE
●We provide free technical service about casting parts and application issues.
●Free on-site touring and introduction of our factory
●We provide process design and validation for free
●We can guarantee on-time delivery of samples and goods
●Close follow-up of all orders by special person and keep customers informed timely
●All after-sale request will be responded in 24 hours
FAQ
1. Q：Are you a manufacturer, trading company or a third party?
A：We are a manufacturer, and we have builded up our company since 1998
2. Q：Where is your factory located?
A：Our factory address is : Address: (Yangjiawan Village) Phase5, Shuofang Industrial Park,
New Area, Wuxi, Jiangsu, China
3. Q：How can i get to your factory?
A：Our factory is near WUXI Airport, we can pick you up in the airport.
4. Q：If i will need to stay in your place for few days, is that possible to book the hotel for me?
A：It’s always my pleasure, hotel booking service is available.
5. Q：What is your minimum order quantity, can you send me samples?
A：Our minimum quantity is 1 set, as our product is machinery equipment, it’s difficult to send you samples, however, we can send you catalog, warmly welcome you to come visit our company.
6. Q：Which level of quality are your products?
A：We have got CE, ISO, SGS, TUV, SONCAP certificate so far.
Please feel free to send us your detailed requirements, you would be satisfied with our service.
Contact Below:
Wuxi Wandeshun Machine Co., Ltd
Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China
Tel:86-510-85260990
Mobile:86-13921534531
86-13806184032
86-13915322227
Fax:86-510-85261990
Email:sales01@wxwds.com
'Quality first, Honesty as base, Sincere service and mutual profit' is our idea, in order to develop continuously and pursue the excellence for Electrical Wire, Cable Wire Single Winding Extrusion Coiling Rewinding Twisting Bunching Machine. We focus on our main business, strategic transformation and value creation as our working policy. We've been persisting in the business essence 'Quality First, Honoring Contracts and Standing by Reputations', providing customers with satisfying products and service.
Hot Tags: Electric Wire draw bench machine, China, manufacturers, suppliers, factory, made in China, Wet Wire Drawing Machine for Fine Wires, Multiwire drawing machine, Industrial Wire Drawing Machine, wire winding machine, wire straightening and cutting machine, Steel Drawing Machine
