Electrical Brass Push on Wire Terminals Block

We insist on quality control on every part, focusing on every detail, providing customers with reliable, high-quality and efficient copper wire twisting machine, wire rod straightening and cutting machine, Stainless Steel Wire Machine. After years of development, the company's product categories continue to increase, the production scale and sales scope continue to expand, thus our company has maintained a good and steady development momentum. We are widely praised in the same industry at home and abroad for its excellent quality, affordable price and high-quality service. Our products sell well all over the world. If companies want to develop, they have to get out of the ivory tower and communicate with the customers they want to establish cooperative relationships with. We will continue to expand our production and sales scale by becoming stronger and bigger.

Model: 24DT/A Fine wire drawing machine with continuous annealing

A. Main components machine

1.24DT/A wire drawing machine  1 set

2.Electrical cabinet           1 set

3.Pay-off                      1 set

4.Cart                         1 set

5.Steam generator              1 set

6.User's manual(specification, instruction, machine structure drawing, die arrangement, foundation drawing, fault resolution, maintain-ance, consumables drawing, electrical drawing, frequency instruction)                   1 set

7.Spare parts          

B. Main technique parameter

1． Usage: Bare copper

2. Inlet diameter: Ф2.0mm-Ф0.8mm

3. Outlet diameter:  Ф0.60mm-Ф0.20mm

4. Maximum drawing speed: 2000MPM/MAX

6.  Dies

Number: 24 dies (Customer self provided)  Ф25mm*8—12mmT

No. 1 is independent; No.2~23 are made of cast iron

Pedestal can be adjusted according to the capstan

7. Mechanism surface reduce rate:

From No.1 to No.23         13%

No.22          8% 

8. Drawing method:  4 spools horizontal arrangement;

9. Motor: Drive motor 30HP(22KW) AC frequency converter control

Spooling motor 7.5HP(5.5KW)AC frequency converter control

10. Annealing voltage: D.C. 60V

11. Annealing ampere: D.C. 600A/MAX

12. Annealing power: 36KVA

13. Annealing method: D.C. three-section annealing

14. Frame: Welded by steel plate

15. Transmission: All transmission by timing belts;

16. Capstan: Tungsten coated; four 10-tier capstans; one single tier capstan for final drawing, with extra keyslot

17. Lubrication system: Spray type; lubrication oil 40 liter/min (without water pump & tank); independent lubrication pipe for No.1 &No.24 Die

18. Spool dimension: Outer diameter Ф300mm; (according to customer’s requirements)

19. Capacity for spool receiving: 50-60KG

20. Spooling control method: Weight balance by swing arm; automatically revise spooling tension

21. Bobbin loading & unloading type: single bobbin fixed with screw (with loading &unloading cart)

22. Traversing unit: 

Traversing system: 110W synchronizing motor traversing; slide-rail bearing

Traversing width: 270mm/Max

23. Brake: 20 KG-M magnetic brake 

24. Protection cover: Grille for transmission area; Stainless steel plate for drawing area;

 Sealed cover with 3 inspection windows for spooling area.

25. Electric parts: Electric control parts made in China and Taiwan or overseas, top-class brand;

26. Power source: Three-phase 415V 50HZ(made according to customer’s requirements)

27. Electric control cabinet: 1000L*800W*2000H(mm)

28. Machine Dimension: 3500L*1600W*1700H (mm)

29. Net weight: 3000KG;

C.  Our Main Products

D.  Spare parts list

1. The tool to disassemble capstan                   1 set

2. Quakeproof cushion                                4 sets

3. Special wrench                                    1 set

4. Weight adjuster                                   1 set

5. Porcelain hole                                    3 sets

7. Pulley                                            1 unit

8. Carbon brush                                      6 sets

9. Sealing strip                                     1 unit

10. Fuse                                             3 sets

11. Nickel belt

Just contact us for detailed information without hesitate, I will reply you quickly.

Wuxi Wandeshun Machine Co., Ltd

Add:Phase5, Shuofang Industrial Park, New Area, Wuxi, Jiangsu, China

Tel:86-510-85260990

Mobile:86-13921534531

       86-13806184032

       86-13915322227

Fax:86-510-85261990

Email:sales@wxwds.com

We wholeheartedly provide users with first-class Electrical Brass Push on Wire Terminals Block and services, contribute more wealth to society and clubs, and create more outstanding contributions to mankind. We adhere to the management philosophy of people-oriented, realistic and innovative, honesty first, and customer first. And a complete sales network has been initially formed in various places, which can provide users with high-quality products and good after-sales service in a timely manner. In response to the challenges of global climate change, our company helps customers and other industries to reduce energy consumption and waste emissions through green production programs, and create social, economic and environmental benefits.

Hot Tags: welding wire drawing machine/zinc alloy wire drawing machine, China, manufacturers, suppliers, factory, made in China, Wet wire drawing machinery, pencil other products, copper wire extrusion, High speed hydraulic drawing machine, combined drawing machine, wet drawing machine