We will continue to carry forward the entrepreneurial spirit of "responsibility and practice", and continue to provide Super Fine Wire Drawing Machine, fine copper wire drawing machine, Pulley Dry Wire Drawing Machine that are trusted by society, recognized by the market, and assured by customers. Please do not hesitate to contact us! We have formed our own core product technology through continuous research on domestic and foreign experience and the introduction of advanced production technology. Our company will show a new service image to the society and win the initiative in the market competition.
Automatic wire nail making machine directions (application)
The water-tank series wire-drawing machine is in wet type to draw low-, mid-, and high-carbon steel wires,as well as non-ferrous. With swift speed, high quality and good reputation, it's the most ideal equipment for steel wires and ropes, galvanized wires, and electric wires manufaturers.
2M6-6 Cutting tool grinder
SD-400 Nail Polishing machine
Wire-laying frame
Model | Units | SD-400 | SD-600 | SD-700 | SD-1000 | SD-2000 |
Capacity | kg | 400 | 600 | 700 | 1000 | 2000 |
Motor power | kw | 3-4 | 4.5-5.5 | 5.5-7.5 | 5.5-7.5 | 11-15 |
Overall size | mm | 1640x900 | 1800x1000 | 1900x1050 | 2000x1500 | 2500x1500 |
Note:For special steel wire process machines and other auxiliary equipment, the custom-made service be made to buyer's requirements.
Main Specifications | Units | BJ23-40 Cap-striking machine |
Productivity | pcs/min | 5x70 |
Capacity | kw | 5.5 |
Motor power | kg | 3000 |
Overall dimensions | mm | 2400x1500x1700 |
Note:This machines is specially used to make the head part (umbrella-shaped head) of a roofing nail. It features advanced mechanism, easier operation and higher capacity. | ||
Main Specifications | Units | GS-B Type high-speed thread rolling machine |
Thread rolling diameters | mm | ø2.0-3.1 |
Working length | mm | 12.5-90 |
Productivity | pcs/min | 600-1000 |
Total weight | kg | 1500 |
Power of motor | kw | 5.5-7.5 |
Overall dimensions | mm | 1420x1220x1450 |
Note:This machines is specially used to thread the nail shanks in annular & twisted forms. | ||
Model | BGD25-1 | BGB50-2 |
Load of roller | 20-25kg | 100kg |
Time control | For more than 0-120 minutes(min) | |
Roller Speed | 7-9 r/min(r/min) | |
Note:This machines is specially used to get roofing nails, concrete nails and gun, etc. electro galvanized. | ||
ZL-A Wire Nail Alignment Packing Feeder
This machines, as a new generation of wire nail packing nuit, is applied to the assistance of nail packing. The wire nails can be trimly packed into cartons, which not only reduces the labour intensity of operators, increases the productivity but lessen the packing volume as well as the cost of packing materials.
ZL-A Wire Nail Alignment Packing Feeder
Model | ZL-A |
Nail length | 60-120mm |
Weight | 1000kg |
Overall dimensions | 2000x2000x1800mm |
JD100 Automatic Coil Nail Welder
This coil nail welder is automatic welding equipment. The nail set in the vibrating feeder are aligned in orderly way under vibration. Through a feeding track, it slides into welding wires to form collated nails. After that, the collated nail strip goes through automatic oil dipping and rust proof unit, drying & counter device, and next are rolled into coil nail (in flat or cone forms). The coil nails are cut off according to a set number of nails, and each coil is finally bound with a rubber band and packed into cartons by operators.
This equipment adopts such high-tech parts as the PLC of Mitsubishi make, Japan and the touch type display of DIGITAL formula, etc., which conduct an automatic test on process flows like lack of raw materials, nail's skip, counting and cutting, etc. These high-tech components cause the whole system to act accurately, reliably and make the product quality steady.
Main Specifications
| Designation | Specifications | Designation | Specifications |
Weldng wire | For coil nail welding | Working power | 3 phase AC220V 50-60HZ 10KVA 3phase |
Vibrating feeder | for nail size nuder d2.1×50 | Welding power | DC300-350V |
Air pressure | ≥4kg/cm2 | Rated power | 8KVA |
Cooling water | 2Liters/min | Max. power | 30KVA |
Working area | 2700x850 | Working cycle | 7% |
Total weight | Approx. 1500kgs | Welding current | 1500A-2000A（secondary side） |
Should you're in need of quality and stable wire nail making machine for wooden made in China, welcome to buy the machine from our factory. We are one of the leading such manufacturers and suppliers in China, equipped with advanced equipment and technology. Welcome to contact us.
With this motto in mind, we've got become among essentially the most technologically innovative, cost-efficient, and price-competitive manufacturers for Automatic 1"-6" Concrete Steel Iron Wire Round Nail Making Machine China Factory Price/Coil Nail Machine/Thread Rolling Twisting Machine. We are committed to providing our customers with good quality products and excellent service. We take pride in being a reliable supplier and have established a good customer base among consumers. 'Honest and trustworthy, sincere service' is our business style, and 'continuous innovation, forge ahead' is our business philosophy. In the fierce market competition, we have won with excellent quality and fast delivery. Our goal is to provide customers with high-quality products and make continuous efforts to achieve the corporate mission of 'becoming one of the innovative companies'.
Hot Tags: wire nail making machine for wooden, China, manufacturers, suppliers, factory, made in China, wire drawing process, drawing machine for wire, electrical wire drawing equipment, Metal bar straightening and cutting machine, Dry wire Drawing Line, copper wire extrusion machine
