The structure of the belt sander is relatively simple, mainly including the following basic components:
1. Base or frame: It is used to support the main structure of the entire belt sander, usually made of solid metal material to ensure the stability and structural strength of the equipment.
2. Motor: The power source that drives the sanding belt, usually installed on the base or frame. The power and speed of the motor will vary depending on the specifications and purpose of the sanding machine.
3. Abrasive belt system: It consists of an abrasive belt, a tensioning device and a transmission system. The abrasive belt is usually made of wear-resistant material, installed between two rollers, and the tension is adjusted by the tensioning device. The transmission system transmits the power of the motor to the abrasive belt to drive it to rotate.
4. Workbench: A platform used to fix the workpiece and provide processing support. It is usually adjustable in height and angle to meet different processing requirements. The workbench is usually located below the abrasive belt, and the workpiece controls its contact with the abrasive belt by adjusting the position of the workbench.
5. Control system: including start, stop, speed adjustment and other control devices, used to control the operating status and processing parameters of the belt sander.
6. Safety protection devices: including protective covers, emergency stop switches and other safety devices, used to protect the safety of operators and prevent accidental injuries.
These components together constitute the basic structure of the belt sander. Through reasonable design and assembly, grinding, polishing and other processing operations on the workpiece surface can be achieved.
https://www.chinawiredrawingmachine.com/
