The drawing motor of the drawing machine adopts S011Z3 inverter, and the winding motor adopts S004G3 special winding inverter (the external braking resistor uses the operation command and output frequ
⑴. Keep the outside of the wire drawing machine clean and hygienic, and check whether the gas supply pipeline and quick connector are in good condition. ⑵, the upper and lower bearing seats and the l
The wire drawing machine starts the synchronization requirement of speed increase during the operation, and the tension needs to be kept constant during the operation. When the whole equipment is stop
The high-speed wire drawing machine can be used to draw various metal wires. As a commonly used wire drawing equipment, its main electrical drive parts include a drawing motor, a wire take-up motor an
The inverted wire drawing machine requires reasonable debugging during operation to ensure that the wire drawing operation can be completed smoothly. After using the inverter, in the process of debugg
Pull the inverted wire drawing machine to the take-up wheel, start the take-up machine, and start the drawing process during operation. During operation, you need to rotate the switch to the linkage s
During the operation of the water tank type wire drawing machine, a good cooling effect must be ensured. In fact, the temperature of the lubricating fluid is too high, resulting in a decrease in the l
The high-speed wire drawing machine is mainly used for drawing metal wires of different specifications, and the electric drive part is composed of a drawing motor, a wire take-up motor and a wire arra
The temperature of the cooling water in the sealed chamber of the water tank type wire drawing machine is too high, exceeding 40 degrees during use, so that the sealed chamber will not have the requir
The temperature of the cooling water in the sealed chamber is too high, exceeding 40℃, so that the sealed chamber will not be able to achieve the required cooling effect on the metal wire, resulting i
The wire drawing machine can also save energy and electricity when in use. We can use a product called an electromagnetic heater, as long as the surface of the wire drawing machine barrel is wrapped w
In the process of using the water tank type wire drawing machine, its wire drawing is a newly introduced surface treatment process. To a certain extent, it is mainly based on aluminum plate, which wil
LanguageLanguage