1. Don't start adjustment work when the equipment is actually operating.
2. Keep the equipment clean and tidy. Nail molds should be cleaned frequently, and it is not necessary to use raw embroidery cables to make nails.
3. After starting, the three-phase five-wire rocker can not be turned to make nails until the equipment is in normal operation. If the actual operation is terminated, the three-phase five-wire should be terminated first.
Fourth, maintain the sharpness of the nail knife.
5. During the entire operation of the equipment, attention should be paid to the temperature rise of each friction position and the generation of abnormal noise at any time and place.
6. In the case of repairing equipment or household appliances, the switching power supply should be turned off first.
https://www.chinawiredrawingmachine.com/
