What are the maintenance methods of the rolling machine?
Clean regularly
Clean the dust, oil and metal debris on the surface of the pointing machine to keep the appearance of the equipment clean and tidy.
Pay special attention to clearing away debris around the rollers and in the gaps to prevent it from affecting the sharpening effect and equipment operation.
Lubrication maintenance
Regularly add appropriate amount of lubricating oil to transmission parts, bearings, etc. to ensure smooth operation and reduce wear.
Pay attention to selecting lubricating oil suitable for the working conditions of the equipment and lubricate according to the prescribed cycle.
Roll inspection
Check the wear of the rollers regularly. If there is uneven wear or excessive wear, repair or replace them in time.
Make sure the surface of the roller is smooth, free of cracks and damage.
Fastening parts
Check whether the screws and nuts at the connecting parts of the equipment are loose and tighten them in time.
Electrical system maintenance
Regularly check whether the electrical circuits are normal and whether there is any damage, aging, etc.
Clean electrical components to ensure proper heat dissipation and prevent short circuits and other malfunctions.
Accuracy calibration
Regularly calibrate the pointing size and accuracy of the pointing machine to ensure that it meets production requirements.
Equipment debugging
Before each use, debug the equipment and check whether it is operating normally and whether there are any abnormal sounds and vibrations.
Storage Notes
When the equipment is not in use for a long time, it should be properly stored to avoid moisture, rust and collision.
It can be seen that the sharpening machine needs regular maintenance and care to extend the life of the sharpening machine. If you encounter any problems during the use of the sharpening machine, please feel free to contact Wandeshun Machine ! I hope we can help you!
https://www.chinawiredrawingmachine.com/
