The steps for using the fine pumping machine are usually as follows:
1. Preparation: Make sure the fine pumping machine is in good working condition, check whether all parts are intact, and confirm that the equipment has been installed firmly.
2. Set parameters: According to needs, set the relevant parameters of the fine pumping machine, including centrifugal force, speed, temperature, etc., to ensure the desired separation effect.
3. Loading: Add the liquid mixture or solution to be separated into the centrifugal cylinder of the fine pump through the feed pipe. Make sure the feed pipe is well sealed to avoid leakage.
4. Start the equipment: Start the fine pumping machine and start running according to the set parameters. Usually, the fine pumping machine generates centrifugal force through high-speed rotation to separate the different components in the liquid.
5. Monitor the separation process: During operation, closely monitor the operation of the centrifuge, including the stability of parameters such as speed, centrifugal force, temperature, and the real-time status of the separation effect.
6. Collect the product: According to the separation effect, use the corresponding collection device to collect the separated product. The product can be further processed or purified as needed.
7. Shutdown and cleaning: After separation is completed, stop the operation of the fine pump, discharge the residue, and clean and maintain the equipment in preparation for the next use.
8. Record data: Record key parameters and results during the separation process in order to analyze and optimize subsequent operations.
https://www.chinawiredrawingmachine.com/
